NINER BIKES WFO 9 RDO Mountain Bikes
More than a decade after our first W.F.O. 9 defined the category and set a benchmark for what a long-travel 29er could do, we’re bringing it back. The 2021 WFO 9 RDO draws on our years of 29er evolution to establish a new paradigm of unbridled, big-wheel domination. Reborn with 170mm of stablesionnsion, a 180mm-travel fork, adjustable geometry, increased frame stiffness, and our signature RDO carbon fiber, the new generation of WFO 9 RDO is an enduro-ready brawler with the pedaling prowess to get you to the top in style.
FEATURES:
Wide, Full Open: A decade later
- Loyal Ninerds feared that it was extinct forever. But the WFO 9 RDO was only dormant, lying in wait, evolving and mutating to reemerge as the apex predator of long-travel 29ers.
- That first W.F.O. cut fresh 29er tracks in too many ways to count. Technologies that we take for granted today were pioneered in that legendary frame.
- What a difference a decade can make. The strongest remaining genetic link between our original and this new WFO 9 RDO is simply an unquenchable appetite for wide, full open, edge of control, “honey, I can’t feel my face” SPEED.
Genetically engineered for “just right” geometry
- All the descending capability of a 170mm travel 29er is fully expressed in this new WFO 9 RDO. Yet any detectable trace of the dreaded “climbing compromises” chromosome is edited out.
- We all know that modern enduro bikes have to manage descents into madness on the scale of World Cup DH tracks. Yet they also need to get you efficiently back up to the top when pedaling is your only option. Which, let’s be honest, is usually the case.
- With this schizophrenic spectrum of duties in mind, we dialed in a “just right” geometry chart for the WFO 9 RDO. It’s low and slack by nature, but not so slouchy as to kick you out of contention on the steepest climbs.
- The native low mode geometry is optimized for all-out, top to bottom, brake-rotor-bluing descents. A 64-degree head tube angle combined with the low BB and long top tube scream “stability” even at eye-watering speeds.
- Yet the wheelbase isn’t so rangy as to prevent tight, uphill transitions when the need arises. And a 77-degree seat tube angle keeps your weight centered over the bottom bracket for composed climbing.
- If your daily dose of dirt includes more pedaling, tighter corners, and sneaky sniper rocks, you might want a higher bottom bracket and steeper head tube angle. Not to worry - the built-in flip-chip seat stay pivots allow riders to raise the BB by a full 9mm and steepen the geometry by 0.7 degrees.
CVA suspension: the core DNA code
- At the heart of our WFO 9 RDO is the Constantly Varying Arc (CVA) suspension system. The first suspension layout made specifically for 29ers, CVA debuted in 2008 and has been the core of Niner’s DNA ever since.
- Our CVA fundamentals are rock solid: it’s stable yet supple while climbing and pedaling; going downhill, it’s sensitive and supportive; it’s consistent and controlled in every phase of travel.
- On the WFO, a trunnion mount shock adds width (and therefore stiffness) to the frame and linkage. The shock bolts directly to the rocker link with bearings at the interface. This allows for extra-smooth articulation through the entire rocker sweep of 40-degrees during suspension travel. Furthermore, trunnion shocks occupy less space, allowing a compact form factor.
- In consideration of the dueling demands riders expect from the WFO 9 RDO, subtle refinements to the kinematics give it superior pedaling behavior despite 170mm of travel on tap. The leverage ratio curve starts at 3.0, hits 2.4 at 67% travel, then hits 2.6 at full travel. It’s also tuned for a slightly falling rate (about 6% in the last 33% of travel). If you’re running an air shock as the bike is spec’d, the overall rate in every phase of travel feels consistent and natural. Even with a coil you won’t feel as though the bike is bottoming out.
- Confidence to drop into the biggest lines, knowing you’ll get consistency and control from top to bottom: that’s CVA suspension.
The brawny big brother in our family tree
- From a distance, the new WFO 9 RDO looks like a fraternal twin to the trail bike in our line, the popular and handsome RIP 9 RDO. However, Niner’s characteristic full-suspension frame cosmetics deceive your eyes. A closer look reveals that the new WFO 9 RDO is clearly the bigger, brawnier sibling that got its square-jawed genes from cousin Vinnie’s side of the family.
- With our signature Rib Cage struts across the front triangle, flattening of the top and down tubes, widening the main rocker link pivot, and beefing up the rear triangle, the entire bike is stiff from front to back. The struts reduce bottom bracket deflection while keeping the upper portion of the front triangle supple and compliant. And the wide, flat surfaces on the top and downtube help to absorb frontal impacts and vibrations while resisting deflection and twisting under torsional load. Finally, crossmembers in the rocker link and swingarm keep the rear of the bike on lockdown.
- In order to get the best possible shifting performance, we designed the smoothest, straightest cable routing possible. Cable housing slides easily through full-sleeve guide tubes in gentle arcs from front to back. And an integrated “cable cage” above the bottom bracket area keeps the housing free to move as the suspension cycles, yet far from harm.
5-STAR SRAM X01 EAGLE AXS LTD Specifications:
Our flagship 5-Star SRAM X01 Eagle AXS LTD build is the ultimate kit to create a dream enduro bike. Add DT Swiss EXC 1200 carbon wheels and the FOX 38 fork, and you're ready to hit send. This WFO is light, fast, and tough.
- SRAM AXS wireless electronic shifting
- FOX 38 Float Factory fork, 180mm
- Schwalbe Magic Mary and Hans Dampf tires
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 FACTORY EVOL, HSC, LSC, HSR, LSR, 2 POSITION, KASHIMA COAT | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | DT SWISS EXC 1501 30MM, CENTERLOCK, 110X15MM FRONT | Rear Wheel | DT SWISS EXC 1200 30MM, CENTERLOCK, 148X12MM REAR, RATCHET EXP 36 |
Front Tire | SCHWALBE MAGIC MARY EVO SUPER TRAIL TLE ADDIX SOFT 2.6 | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SRAM CODE RSC | Brake Levers | SRAM CODE RSC |
Brake Rotors | 200/200 CENTERLINE ROTORS | Chain | SRAM XX1 EAGLE 12SP RAINBOW |
FRONT SHIFTER | N/A | Rear Shifter | RAM AXS EAGLE 12SP |
FRONT DERAILLEUR | N/A | Rear Derailleur | SRAM X01 AXS EAGLE 12SP WITH BATTERY COVER |
Cassette | SRAM EAGLE XG 1295, 10-50T | CrankSet | SRAM X1 EAGLE CARBON DUB, 32T, 170MM |
Bottom Bracket | SRAM DUB BSA THREADED | Saddle | NINER CUSTOM TR WITH CRN-TI RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, L/XL-175MM) | Handlebar | RACE FACE NEXT R 800MM WIDE, 35MM RISE, 35MM CLAMP |
Stem | RACE FACE TURBINE R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O FLANGED SOFT COMPOUND | APPROX. WEIGHT | 31.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
5-STAR SRAM X01 Eagle Specifications:
A high end 5-Star SRAM X01 Eagle build is the perfect blend of premium parts to complete this enduro bike. With FOX suspension and DT Swiss wheels, our WFO 9 RDO is ready to attack any enduro course.
- SRAM X01 Eagle drivetrain and Code RSC brakes
- DT Swiss EXC 1200 wheels
- Schwalbe Magic Mary and Hans Dampf tires
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 FACTORY EVOL, HSC, LSC, HSR, LSR, 2 POSITION, KASHIMA COAT | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | DT SWISS EXC 1501 30MM, CENTERLOCK, 110X15MM FRONT | Rear Wheel | DT SWISS EXC 1501 30MM, CENTERLOCK, 148X12MM REAR, RATCHET EXP 36 |
Front Tire | SCHWALBE MAGIC MARY EVO SUPER TRAIL TLE ADDIX SOFT 2.6 | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SRAM CODE RSC | Brake Levers | SRAM CODE RSC |
Brake Rotors | 200/200 CENTERLINE ROTORS | Chain | SRAM X01 EAGLE 12SP |
FRONT SHIFTER | N/A | Rear Shifter | SRAM X01 EAGLE 12SP |
FRONT DERAILLEUR | N/A | Rear Derailleur | SRAM X01 EAGLE 12SP |
Cassette | SRAM EAGLE XG 1295, 10-50T | CrankSet | SRAM X1 EAGLE CARBON DUB 32T CNC RING, 170MM |
Bottom Bracket | SRAM DUB BSA THREADED | Saddle | NINER CUSTOM TR WITH CRN-TI RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, L/XL-175MM) | Handlebar | RACE FACE NEXT R 800MM WIDE, 35MM RISE, 35MM CLAMP |
Stem | RACE FACE TURBINE R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O FLANGED SOFT COMPOUND | APPROX. WEIGHT | 31.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
4-STAR SHIMANO XT Specifications:
If you're a Shimano fan, our 4-Star Shimano XT build is a great blend of performance and value for the WFO 9 RDO. FOX Factory suspension, Shimano 4-piston brakes, and DT Swiss wheels complete this popular configuration.
- Shimano XT drivetrain and M8100 trail brakes with 203mm rotors
- Schwalbe Magic Mary and Hans Dampf tires
- DT Swiss EX 1700 Spline 30 wheels
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 FACTORY EVOL, HSC, LSC, HSR, LSR, 2 POSITION, KASHIMA COAT | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | DT SWISS EXC 1501 30MM, CENTERLOCK, 110X15MM FRONT | Rear Wheel | DT SWISS EX 1700 SPLINE 30MM, CENTERLOCK, 148X12MM REAR |
Front Tire | DT SWISS EX 1700 SPLINE 30MM, CENTERLOCK, 110X15MM FRONT | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SHIMANO XT M8120, METAL PAD W/ FIN | Brake Levers | SHIMANO XT M8100 |
Brake Rotors | 203/203 MT800 ROTORS | Chain | SHIMANO XT M8100 W/ QUICKLINK |
FRONT SHIFTER | N/A | Rear Shifter | SHIMANO XT M8100 12SP I-SPEC EV |
FRONT DERAILLEUR | N/A | Rear Derailleur | SHIMANO XT M8100 SGS 12SP |
Cassette | SHIMANO XT M8100 12SP, 10-51T | CrankSet | RACEFACE NEXT R CARBON 12SP, 32T, 170MM |
Bottom Bracket | RACEFACE BSA THREADED | Saddle | NINER CUSTOM TR WITH CRN-TI RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, LG-175MM) | Handlebar | RACE FACE NEXT R 800MM WIDE, 35MM RISE, 35MM CLAMP |
Stem | RACE FACE TURBINE R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O FLANGED SOFT COMPOUND | APPROX. WEIGHT | 32.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
3-STAR SRAM GX EAGLE AXS LTD Specifications:
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 FACTORY EVOL 2 POSITION, KASHIMA COAT | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | DT SWISS E 1900 SPLINE, ALUMINUM CLINCHER, 30MM INTERNAL, 110X15MM, CENTERLOCK | Rear Wheel | DT SWISS E 1900 SPLINE, ALUMINUM CLINCHER, 30MM INTERNAL, 148X12MM, CENTERLOCK, RATCHET SYSTEM LN |
Front Tire | SCHWALBE MAGIC MARY EVO SUPER TRAIL TLE ADDIX SOFT 2.6 | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SRAM CODE R | Brake Levers | SRAM CODE R |
Brake Rotors | 200/200 CENTERLINE ROTORS | Chain | SRAM GX EAGLE 12SP |
FRONT SHIFTER | N/A | Rear Shifter | SRAM GX EAGLE AXS 12SP |
FRONT DERAILLEUR | N/A | Rear Derailleur | SRAM GX EAGLE AXS 12SP WITH BATTERY COVER |
Cassette | SRAM EAGLE XG 1275, 10-52T | CrankSet | SRAM DESCENDANT 7K EAGLE DUB, 32T, 170MM |
Bottom Bracket | SRAM DUB BSA THREADED | Saddle | NINER CUSTOM TR WITH CR-MO RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, LG-175MM) | Handlebar | RACE FACE AEFFECT R 780MM WIDE, 20MM RISE, 35MM CLAMP |
Stem | RACE FACE AEFFECT R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O NYLON SOFT COMPOUND | APPROX. WEIGHT | 33.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
3-STAR SRAM GX EAGLE Specifications:
The most popular kit in our range, the fan-favorite 3-Star SRAM GX Eagle build is an ideal blend of performance and value for this long-travel 29er enduro bike. Fox Factory suspension and DT Swiss wheels complete an outstanding parts pick for the WFO.
- SRAM GX Eagle 12-speed shifting
- Schwalbe Magic Mary and Hans Dampf tires
- SRAM Code R brakes
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 FACTORY EVOL, HSC, LSC, HSR, LSR, 2 POSITION, KASHIMA COAT | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | DT SWISS E 1900 SPLINE 30MM, CENTERLOCK, 110X15MM FRONT | Rear Wheel | DT SWISS E 1900 SPLINE 30MM, CENTERLOCK, 148X12MM REAR |
Front Tire | SCHWALBE MAGIC MARY EVO SUPER TRAIL TLE ADDIX SOFT 2.6 | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SRAM CODE R | Brake Levers | SRAM CODE R |
Brake Rotors | 200/200 CENTERLINE ROTORS | Chain | SRAM GX EAGLE 12SP |
FRONT SHIFTER | N/A | Rear Shifter | SRAM GX EAGLE 12SP |
FRONT DERAILLEUR | N/A | Rear Derailleur | SRAM GX EAGLE 12SP |
Cassette | SRAM EAGLE XG 1275, 10-52T | CrankSet | SRAM DESCENDANT 7K EAGLE DUB, 32T, 170MM |
Bottom Bracket | SRAM DUB BSA THREADED | Saddle | NINER CUSTOM TR WITH CR-MO RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, LG-175MM) | Handlebar | RACE FACE AEFFECT R 780MM WIDE, 20MM RISE, 35MM CLAMP |
Stem | RACE FACE AEFFECT R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O NYLON SOFT COMPOUND | APPROX. WEIGHT | 33.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
2-STAR SRAM SX EAGLE Specifications:
Hit the trail without a hit to your wallet, thanks to our SRAM 2-star SX Eagle parts kit. Wring out every ounce of enduro-ready, WFO 9 RDO performance at a price that won’t leave you breathless.
- SRAM SX Eagle 12-speed shifting
- FOX FLOAT Performance suspension
- SRAM Level brakes
AVAILABLE FRAME SIZES | SM, MD, LG | Available Colors | HOT TAMALE AND FADE TO BLACK |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS | Fork | FOX 38 FLOAT PERFORMANCE GRIP EVOL, 3 POSITION, 180MM, 110X15MM, 44MM OFFSET |
Shock | FOX FLOAT X2 PERFORMANCE EVOL, HSC, LSC, LSR, 2 POSITION | Tubes/Sealant | STANS NO TUBES SEALANT (2 X 2OZ BOTTLES) |
Front Wheel | NINER ALLOY 30MM, 110X15MM FRONT | Rear Wheel | NINER ALLOY 30MM, 148X12MM REAR |
Front Tire | SCHWALBE MAGIC MARY EVO SUPER TRAIL TLE ADDIX SOFT 2.6 | Rear Tire | SCHWALBE HANS DAMPF EVO SUPER TRAIL TLE ADDIX SOFT 2.6 |
Brakes | SRAM G2 R | Brake Levers | SRAM G2 R |
Brake Rotors | 200/200 CENTERLINE ROTORS | Chain | SRAM SX EAGLE 12SP |
FRONT SHIFTER | N/A | Rear Shifter | SRAM SX EAGLE 12SP |
FRONT DERAILLEUR | N/A | Rear Derailleur | SRAM SX EAGLE 12SP |
Cassette | SRAM PG 1210 11-50T | CrankSet | SRAM X1 1K EAGLE DUB, 32T, 170MM |
Bottom Bracket | SRAM DUB BSA THREADED | Saddle | NINER CUSTOM TR WITH CR-MO RAILS, PRINTED NINER GRAPHIC |
SeatPost | KS LEV SI (S-125MM, M-150MM, LG-175MM) | Handlebar | RACE FACE AEFFECT R 780MM WIDE, 20MM RISE, 35MM CLAMP |
Stem | RACE FACE AEFFECT R 40MM, 35MM CLAMP | Headset | NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 |
Grips | NINER GRRRIPS L/O NYLON SOFT COMPOUND | APPROX. WEIGHT | 33.5 |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
FRAME ONLY
Build it your way with our “frame only” option. Dressed with a FOX FLOAT Factory x2 rear shock and packaged with all the hardware to build your personal dream bike, the WFO 9 RDO frame makes a great foundation for your enduro riding efforts.
- FOX FLOAT Factory X2 rear shock
- Seatpost size 30.9 (34.9 collar included)
- 73mm threaded BB
AVAILABLE FRAME SIZES | SM, MD, LG |
Frame | NINER RDO CARBON FIBER, 170MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS |
Available Colors | HOT TAMALE AND FADE TO BLACK |
TECHNICAL SPECIFICATIONS:
FRAME FITTINGS AND MOUNTS | 1 BOTTLE CAGE IN FRONT TRIANGLE | REAR SUSPENSION TRAVEL | 170MM |
MAXIMUM FRONT SUSPENSION | 180MM | FORK OFFSET | 44MM |
SHOCK SIZE | 205X65MM TRUNNION | SHOCK MOUNTING HARDWARE | UPPER - M10 X 54 TRUNNION, LOWER M8 X 25MM |
SUGGESTED SHOCK SAG | 0% (19.5MM) | SEATPOST SIZE | 30.9 |
SEAT COLLAR SIZE | 34.9 | CABLE ROUTING | INTERNAL |
FRONT DERAILLEUR | N/A | HEADSET SIZE | SHIS DESCRIPTION ZS44/28.6 | ZS56/40 |
PIVOT BEARING SPECS | (8X) 26 X 17 X 5MM ENDURO BO MAX, (2X) 26 X 17 X 10MM ENDURO DOUBLE ROW, (2X) 22 X 10 X 6MM ENDURO BO MAX |
CHAINRING COMPATIBILITY | 1X |
MAXIMUM CHAINRING SIZE | 36T | Q-FACTOR | N/A |
ISCG COMPATIBILITY | ISCG 05 | BOTTOM BRACKET TYPE | BSA THREADED |
BIOCENTRIC COMPATIBLE | N/A | BRAKE MOUNT TYPE | POST MOUNT (180MM MIN ROTOR) |
MAXIMUM REAR ROTOR SIZE | 203MM | REAR WHEEL SPACING | 12X148MM |
REAR WHEEL THROUGH AXLE SPEC | 12 X 182MM, M12 X P1.0, L15MM | FRONT WHEEL AXLE SPACING | N/A |
FRONT WHEEL THROUGH AXLE SPEC | N/A | MAX TIRE SIZE | 29 X 2.6 |
We make every effort to publish accurate build specs, however Niner Bikes reserves the right to make substitutions or changes to bike assembly specification at any time without notice or warning. Product images may not reflect actual specification. Minor variance in color may be visible including fork decal color. Published approximate weights are for size medium (53cm) and may vary by +/- 15% due to manufacturing tolerances.
Welcome to Belcopia Bicycles!
Belcopia Bicycles is owned and operated by Millionaire Pod LLC.
This Return Policy applies to all products purchased through:
Our return policy forms part of, and should be read in conjunction with, our terms and conditions, our privacy policy and our shipping policy. We reserve the right to change this return policy at any time.
Returns are only made once the product has arrived at its destination and has been received by the purchaser, no returns are made on products that are in transit for delivery or have not yet been delivered.
By making a purchase through the website, you declare and agree to be bound by the conditions described below. Our refund policy does not affect your statutory rights.
If you have questions about this return policy, please contact us through our contact page or call us at: (800) 674-9351 or email: support@belcopia.com
To read more visit our Return Policy
Welcome to Belcopia Bicycles!
Belcopia Bicycles is owned and operated by Millionaire Pod.
Thank you for shopping at Belcopia Bicycles, this shipping policy applies to all products offered and published by Belcopia Bicycles on the website:
Belcopia Bicycles is committed to deliver the product in perfect condition at the address indicated by the customer in the checkout page. In order to optimize delivery, we thank the customer for indicating an address in which the order can be delivered within normal business hours.
If you have any questions about this Shipping Policy, please contact us through our contact page or call us at (800) 674-9351, or email: support@belcopia.com.
- BELCOPIA BICYCLES SHIPPING
- Belcopia Bicycles delivers nationwide (U.S.).
Belcopia Bicycles orders are shipped and delivered on business days (Monday - Friday - 8 AM - 5 PM EST). For security reasons, Belcopia Bicycles will not send any order to post office boxes or military bases, nor will it accept any order when it is not possible to identify the recipient of the order and its address.
- SHIPPING COSTS
Belcopia Bicycles offers free shipping on orders over $200. On orders under $200, shipping costs will depend on the delivery location of the order and will be calculated and displayed at checkout. Please check the shipping costs depending on the place of delivery before placing the order.
Belcopia Bicycles may on occasion and as a result of special offers, promotions and special days, offer free shipping on some or all products. Free shipping will be applied to the order at the time of purchase.
To read more visit our Shipping Policy
At Belcopia, we understand the unique and unparalleled feeling of freedom that comes with biking.
Our story began in New York City where two-wheelers were a ubiquitous part of life - from subway platforms to Brooklyn sidewalks.
Here, cycling was associated with coolness; those able to pull off fixies or wheelies on BMXs easily earned themselves the title ‘coolest kid on the block’!
Fast forward to today, electric bikes have hit the streets, becoming an increasingly popular choice among city commuters and delivery personnel alike. As they become more accessible to everyday users, these bicycles are quickly taking over as a viable commuting option - no surprise given their cost-effectiveness and eco-friendliness!
At Belcopia, our eagerness to meet the growing demand for stylish and efficient electric bikes was inspiring. We saw an exciting opportunity to provide innovative solutions that seamlessly incorporated cutting-edge technology with modern design.
To read more visit our About The Brand